head_banner

Products

  • SUP-P300 Common Rail Pressure Transmitter

    SUP-P300 Common Rail Pressure Transmitter

    The fuel rail pressure sensor is a small but critical component of an automotive fuel system. It measures the pressure in the fuel system and facilitates the detection of leaks, especially those generated by gasoline evaporation.

  • SUP-LDG Remote type electromagnetic flowmeter

    SUP-LDG Remote type electromagnetic flowmeter

    Electromagnetic flowmeter is only applicable to measure the flow of conductive liquid, which is wide used in water supply, sewage water measuring, industry chemical measuring etc. The remote type is with high IP protection class and can be installed in different locations for the transmitter and converter. Output signal can pulse,4-20mA or with RS485 communication.

    Features

    • Accuracy:±0.5%(Flow speed > 1m/s)
    • Reliably:0.15%
    • Electric conductivity: Water: Min. 20μS/cm

    Other liquid:Min.5μS/cm

    • Flange:ANSI/JIS/DIN DN15…1000
    • Ingress protection:IP68
  • SUP-LDG Carbon steel body electromagnetic flow meter

    SUP-LDG Carbon steel body electromagnetic flow meter

    SUP-LDG electromagnetic flow meter is applicable for all conductive liquids. Typical applications are monitoring accurate measurements in liquid, metering and custody transfer. Can display both instantaneous and cumulative flow, and supports analog output, communication output and relay control functions. Features

    • Pipe diameter: DN15~DN1000
    • Accuracy: ±0.5%(Flow speed > 1m/s)
    • Reliability:0.15%
    • Electric conductivity: Water: Min. 20μS/cm; Other liquid:Min.5μS/cm
    • Turndown ratio: 1:100
    • Power supply:100-240VAC,50/60Hz; 22-26VDC
  • SUP-LDG Stainless steel body electromagnetic flowmeter

    SUP-LDG Stainless steel body electromagnetic flowmeter

    Magnetic flowmeters operate under the principle of Faraday’s Law of Electromagnetic Induction to measure liquid velocity. Following Faraday’s Law, magnetic flowmeters measure the velocity of conductive liquids in pipes, such as water, acids, caustic, and slurries. In order of usage, magnetic flowmeter use in water/wastewater industry, chemical, food and beverage, power, pulp and paper, metals and mining, and pharmaceutical application. Features

    • Accuracy:±0.5%,±2mm/s(flowrate<1m/s)
    • Electric conductivity: Water: Min. 20μS/cm

    Other liquid:Min.5μS/cm

    • Flange:ANSI/JIS/DIN DN10…600
    • Ingress protection:IP65
  • SUP-LDG Sanitary electromagnetic flowmeter for food processing

    SUP-LDG Sanitary electromagnetic flowmeter for food processing

    SUP-LDG Sanitary electromagnetic flowmeter is made of stainless steel, which is widely used in water supply, waterworks, food processing, etc. It supports pulse, 4-20mA or RS485 communication signal output.

    Features

    • Accuracy:±0.5%(Flow speed > 1m/s)
    • Reliably:0.15%
    • Electric conductivity: Water: Min. 20μS/cm

    Other liquid:Min.5μS/cm

    • Flange:ANSI/JIS/DIN DN15…1000
    • Ingress protection:IP65

    Tel.: +86 15867127446 (WhatApp)Email : info@Sinomeasure.com

  • SUP-LDGR Electromagnetic BTU meter

    SUP-LDGR Electromagnetic BTU meter

    Sinomeasure electromagnetic BTU meters accurately measure the thermal energy consumed by chilled water in British thermal units (BTU), which is a basic indicator for measuring thermal energy in commercial and residential buildings. BTU meters are usually used in commercial and industrial as well as office buildings for chilled water systems, HVAC, heating systems, etc. Features

    • Accuracy:±2.5%
    • Electric conductivity:>50μS/cm
    • Flange:DN15…1000
    • Ingress protection:IP65/ IP68
  • SUP-LUGB Vortex flowmeter wafer installation

    SUP-LUGB Vortex flowmeter wafer installation

    SUP-LUGB Vortex flowmeter work on the principle of generated vortex and relation between vortex and flow by theory of Karman and Strouhal, which specialize in measurement of steam, gas and liquid of lower viscosity. Features

    • Pipe diameter:DN10-DN500
    • Accuracy: 1.0% 1.5%
    • Range Ratio: 1:8
    • Ingress protection: IP65

    Tel.: +86 15867127446 (WhatApp)Email : info@Sinomeasure.com

  • SUP-PH6.3 pH ORP meter

    SUP-PH6.3 pH ORP meter

    SUP-PH6.3 industrial pH meter is an online pH analyzer which applied in chemical industry metallurgy, environment protection, food, agriculture and so on. With 4-20mA analog signal, RS-485 digital signal and relay output. Can be used for industrial processes and water treatment processes pH control, and support remote data transmission, etc. Features

    • Measure range:pH: 0-14 pH, ±0.02pH;ORP: -1000 ~1000mV, ±1mV
    • Input Resistance:≥10~12Ω
    • Power supply: 220V±10%,50Hz/60Hz
    • Output:4-20mA,RS485, Modbus-RTU,Relay
  • SUP-PH6.0 pH ORP meter

    SUP-PH6.0 pH ORP meter

    SUP-PH6.0 industrial pH meter is an online pH analyzer which applied in chemical industry metallurgy, environment protection, food, agriculture and so on. With 4-20mA analog signal, RS-485 digital signal and relay output. Can be used for industrial processes and water treatment processes pH control, and support remote data transmission, etc. Features

    • Measure range:pH: 0-14 pH, ±0.02pH;ORP: -1000 ~1000mV, ±1mV
    • Input Resistance: ≥10~12Ω
    • Power supply: 220V±10%,50Hz/60Hz
    • Output: 4-20mA,RS485, Modbus-RTU,Relay
  • SUP-PSS200 Suspended solids/ TSS/ MLSS meter

    SUP-PSS200 Suspended solids/ TSS/ MLSS meter

    SUP-PTU200 Suspended Solids Meter based on the infrared absorption scattered light method and combined with the application of ISO7027 method, can guarantee the continuous and accurate detection of suspended solids and sludge concentration. Based on ISO7027, infrared double scattering light technology will not be affected by chroma for the measurement of cuspended colids and cludge concentration value. According to the usage environment, self-cleaning function can be equipped with. Features Range: 0.1 ~ 20000 mg/L; 0.1 ~ 45000 mg/L; 0.1 ~ 120000 mg/LResolution:Less than ± 5% of the measured valuePressure range: ≤0.4MPaPower supply: AC220V±10%; 50Hz/60Hz

  • SUP-PTU200 Turbidity meter

    SUP-PTU200 Turbidity meter

    SUP-PTU200 turbidity meter based on the infrared absorption scattered light method and combined with the application of ISO7027 method, can guarantee the continuous and accurate detection of turbidity. Based on ISO7027, infrared double scattering light technology will not be affected by chroma for the measurement of turbidity value. According to the usage environment, self-cleaning function can be equipped with. It assures the stability of data and reliability of performance; with the built-in self-diagnosis function, it can make sure the accurate data be delivered; besides, the installation and calibration is quite simple. Features Range: 0.01-100 NTU 、0.01-4000 NTUResolution:Less than ± 2% of the measured valuePressure range: ≤0.4MPaPower supply: AC220V±10%; 50Hz/60Hz

  • SUP-PTU8011 Low turbidity sensor

    SUP-PTU8011 Low turbidity sensor

    SUP-PTU-8011 widely used in such fields as sewage plants, Drinking water plants, water stations, surface water, and industries for inspecting the turbidity. Features Range: 0.01-100NTUResolution:The deviation of reading in 0.001~40NTU is ±2% or ±0.015NTU, choose the bigger one; and it is ±5% in the range of 40-100NTUFlow Rate: 300ml/min≤X≤700ml/minPipe Fitting: Injection Port: 1/4NPT; Discharge Outlet: 1/2NPT

123456 Next > >> Page 1 / 10