-
SUP-PH6.3 pH ORP meter
SUP-PH6.3 industrial pH meter is an online pH analyzer which applied in chemical industry metallurgy, environment protection, food, agriculture and so on. With 4-20mA analog signal, RS-485 digital signal and relay output. Can be used for industrial processes and water treatment processes pH control, and support remote data transmission, etc. Features
- Measure range:pH: 0-14 pH, ±0.02pH;ORP: -1000 ~1000mV, ±1mV
- Input Resistance:≥10~12Ω
- Power supply: 220V±10%，50Hz/60Hz
- Output:4-20mA,RS485, Modbus-RTU,Relay
-
SUP-PH6.0 pH ORP meter
SUP-PH6.0 industrial pH meter is an online pH analyzer which applied in chemical industry metallurgy, environment protection, food, agriculture and so on. With 4-20mA analog signal, RS-485 digital signal and relay output. Can be used for industrial processes and water treatment processes pH control, and support remote data transmission, etc. Features
- Measure range:pH: 0-14 pH, ±0.02pH;ORP: -1000 ~1000mV, ±1mV
- Input Resistance: ≥10~12Ω
- Power supply: 220V±10%，50Hz/60Hz
- Output: 4-20mA,RS485, Modbus-RTU,Relay
-
SUP-PSS200 Suspended solids/ TSS/ MLSS meter
SUP-PTU200 Suspended Solids Meter based on the infrared absorption scattered light method and combined with the application of ISO7027 method, can guarantee the continuous and accurate detection of suspended solids and sludge concentration. Based on ISO7027, infrared double scattering light technology will not be affected by chroma for the measurement of cuspended colids and cludge concentration value. According to the usage environment, self-cleaning function can be equipped with. Features Range: 0.1 ~ 20000 mg/L; 0.1 ~ 45000 mg/L; 0.1 ~ 120000 mg/LResolution:Less than ± 5% of the measured valuePressure range: ≤0.4MPaPower supply: AC220V±10%; 50Hz/60Hz
-
SUP-PTU200 Turbidity meter
SUP-PTU200 turbidity meter based on the infrared absorption scattered light method and combined with the application of ISO7027 method, can guarantee the continuous and accurate detection of turbidity. Based on ISO7027, infrared double scattering light technology will not be affected by chroma for the measurement of turbidity value. According to the usage environment, self-cleaning function can be equipped with. It assures the stability of data and reliability of performance; with the built-in self-diagnosis function, it can make sure the accurate data be delivered; besides, the installation and calibration is quite simple. Features Range: 0.01-100 NTU 、0.01－4000 NTUResolution:Less than ± 2% of the measured valuePressure range: ≤0.4MPaPower supply: AC220V±10%; 50Hz/60Hz
-
SUP-PTU8011 Low turbidity sensor
SUP-PTU-8011 widely used in such fields as sewage plants, Drinking water plants, water stations, surface water, and industries for inspecting the turbidity. Features Range: 0.01-100NTUResolution:The deviation of reading in 0.001~40NTU is ±2% or ±0.015NTU, choose the bigger one; and it is ±5% in the range of 40-100NTUFlow Rate: 300ml/min≤X≤700ml/minPipe Fitting: Injection Port: 1/4NPT; Discharge Outlet: 1/2NPT
-
SUP-PSS100 Suspended solids/ TSS/ MLSS meter
SUP-PSS100 Suspended solids meter based on the infrared absorption scattered light method used to measure liquid suspended solids and sludge concentration. Features Range: 0.1 ~ 20000 mg/L; 0.1 ~ 45000 mg/L; 0.1 ~ 120000 mg/LResolution:Less than ± 5% of the measured valuePressure range: ≤0.4MPaPower supply: AC220V±10%; 50Hz/60HzHotline: +86 15867127446 (WhatApp)Email : info@Sinomeasure.com
-
SUP-PTU100 Turbidity meter
SUP-PTU 100 turbidity meter based on the infrared absorption scattered light method guarantee the continuous and accurate detection of turbidity. Features Range: 0.1 ~ 20000 mg/L; 0.1 ~ 45000 mg/L; 0.1 ~ 120000 mg/LResolution:Less than ± 5% of the measured valuePressure range: ≤0.4MPaPower supply: AC220V±10%; 50Hz/60Hz
-
SUP-DM3000 Electrochemical dissolved oxygen meter
SUP-DM3000 Membrane type dissolved oxygen is the measure of oxygen dissolved in an aqueous solution. Polarographic measurement principle, the dissolution value depends on the temperature of the aqueous solution, pressure and salinity in solution. The meter uses a liquid crystal display for measuring and displaying DO and medium temperature values, with analog and digital signal outputs and control functions. Features Range: 0-20mg/L,0-200%,0-400hPaResolution:0.01mg/L,0.1%,1hPaOutput signal: 4~20mA; Relay; RS485Power supply: AC220V±10%; 50Hz/60Hz
-
SUP-TDS210-B Conductivity meter
SUP-TDS210-B Conductivity/Hardness/Resistivity Online analyzer, an intelligent Online chemical analyzer, is widely applied for continuous monitoring and measurement of EC value or TDS value or ER value and temperature in the solution in the industry of thermal power, chemical fertilizer, environmental protection, metallurgy, pharmacy, biochemistry, food and water, etc. Features Range:0.01 electrode: 0.02～20.00us/cm
0.1 electrode: 0.2～200.0us/cm
1.0 electrode: 2～2000us/cm
10.0 electrode: 0.02～20ms/cmResolution:±2%FSOutput signal: 4~20mA; Relay; RS485Power supply:AC220V±10%, 50Hz/60HzHotline: +86 15867127446 (WhatApp)Email : info@Sinomeasure.com -
SUP-DY3000 Optical dissolved oxygen meter
SUP-DY3000 Optical type dissolved oxygen online analyzer, an intelligent online chemical analyzer. The cap of the sensor is coated with a luminescent material. Blue light from an LED illuminates the luminescent chemical. The luminescent chemical instantly becomes excited and releases red light. The time and intensity of red light are inversely proportional to the concentration of oxygen molecules, So the concentration of oxygen molecules is calculated. Features Range: 0-20mg/L,0-200%,0-400hPaResolution:0.01mg/L,0.1%,1hPaOutput signal: 4~20mA; Relay; RS485Power supply: AC220V±10%; 50Hz/60Hz
-
SUP-EC8.0 conductivity meter
SUP-EC8.0 conductivity meter is an intelligent online chemical analyzer, is widely applied for continuous monitoring and measurement of EC value or TDS value or ER value and temperature in the solution in the industry of thermal power, chemical fertilizer, environmental protection, metallurgy, pharmacy, biochemistry, food and water, etc. Features Range:0.01 electrode: 0.00uS/cm～2000mS/cmResolution:±1%FSOutput signal: 4~20mA; Relay; RS485Power supply:90 to 260 VAC
-
SUP-DM2800 Membrane dissolved oxygen meter
SUP-DM2800 Membrane type dissolved oxygen is the measure of oxygen dissolved in an aqueous solution. Polarographic measurement principle, the dissolution value depends on the temperature of the aqueous solution, pressure and salinity in solution. The meter uses a liquid crystal display for measuring and displaying DO and medium temperature values, with analog and digital signal outputs and control functions. Features Range: 0-20mg/L,0-200%,0-400hPaResolution:0.01mg/L,0.1%,1hPaOutput signal: 4~20mA; Relay; RS485Power supply: AC220V±10%; 50Hz/60HzHotline: +86 15867127446 (WhatApp)Email : info@Sinomeasure.com
-
SUP-TDS210-C Conductivity meter
SUP-TDS210-C Conductivity meter EC controller, an intelligent Online chemical analyzer, is widely applied for continuous monitoring and measurement of EC value or TDS value or ER value and temperature in the solution in the industry of thermal power, chemical fertilizer. Features Range:0.01 electrode: 0.02～20.00us/cm
0.1 electrode: 0.2～200.0us/cm
1.0 electrode: 2～2000us/cm
10.0 electrode: 0.02～20ms/cmResolution:±2%FSOutput signal: 4~20mA; Relay; RS485Power supply:AC220V±10%, 50Hz/60Hz -
SUP-PH8.0 pH ORP meter
SUP-PH8.0 industrial pH meter is an online pH analyzer which applied in chemical industry metallurgy, environment protection, food, agriculture and so on. With 4-20mA analog signal, RS-485 digital signal and relay output. Can be used for industrial processes and water treatment processes pH control, and support remote data transmission, etc. Features
- Measure range:pH: 0-14 pH, ±0.02pH;ORP: -1000 ~1000mV, ±1mV
- Input Resistance: ≥10~12Ω
- Power supply: 220V±10%，50Hz/60Hz
- Output: 4-20mA,RS485, Modbus-RTU,Relay
Tel.: +86 15867127446 (WhatApp)Email : info@Sinomeasure.com
-
SUP-PH160S pH ORP meter
SUP-PH160S industrial pH meter is an online pH analyzer with 4-20mA analog signal, RS-485 digital signal and relay output. Can be used for industrial processes and water treatment processes pH control, and support remote data transmission, etc. Features
- Measure range:pH: 0-14 pH, ±0.02pH;ORP: -1000 ~1000mV, ±1mV
- Input Resistance:≥10~12Ω
- Power supply: 220V±10%，50Hz/60Hz
- Output:4-20mA,RS485, Modbus-RTU,Relay
Tel.: +86 15867127446 (WhatApp)Email : info@Sinomeasure.com
-
pH installation accessories
pH installation box, ph installation bracket and ph signal amplifier for pH sensor and controller installation. Features
-
SUP-DY2900 Optical dissolved oxygen meter
SUP-DY2900 Optical type Dissolved oxygen online analyzer, an intelligent online chemical analyzer. The cap of the sensor is coated with a luminescent material. Blue light from an LED illuminates the luminescent chemical. The luminescent chemical instantly becomes excited and releases red light. The time and intensity of red light are inversely proportional to the concentration of oxygen molecules, So the concentration of oxygen molecules is calculated. Features Range: 0-20mg/L,0-200%,0-400hPaResolution:0.01mg/L,0.1%,1hPaOutput signal: 4~20mA; Relay; RS485Power supply: AC220V±10%; 50Hz/60Hz
-
Sinomeasure Multi-parameter analyzer
The Multi-parameter analyzer can be widely used in urban or rural water supply plants, tap water pipeline networks, tap water secondary water supply, user taps, indoor swimming pools, Online monitoring of water quality such as large-scale water purification equipment and direct drinking water is an indispensable online analysis equipment in the fields of water plant production process control, water conservancy and water management, and sanitation supervision. Features PH /ORP:0-14pH, ±2000mVTurbidity:0-1NTU / 0-20NTU / 0-100NTU / 0-4000NTUConductivity:1-2000uS/cm / 1~200mS/mDissolved oxygen:0-20mg/L
-
SUP-PTU300 Turbidity meter
○Laser light source, with ultra-high noise ratio, high monitoring accuracy○Small size, easy system integration water consumption is small, saving daily operation cost○It can be applied to the turbidity measurement of drinking water after membrane-type clean water○Automatic discharge, long time maintenance-free operation, save daily operation and maintenance costs○Optional Internet of things module support cloud platform and mobile phone data remote monitoring. Features Range:0-20 NTU (31),0-1 NTU (30)Power supply:DC 24V (19-30V)Measurement:90° scatteringOutput: 4-20mA, RS485
-
Standard pH calibration solutions
Sinomeasure standard pH calibration solutions have an accuracy of +/- 0.01 pH at 25°C (77°F). Sinomeasure can provide the most popular and commonly used buffers (4.00, 7.00, 10.00 and 4.00, 6.86, 9.18) and which are dyed different colors so they can be easily identified when you are busy working. Features Accuracy: +/- 0.01 pH at 25°C (77°F)Solution value: 4.00, 7.00, 10.00 and 4.00, 6.86, 9.18Volume: 50ml * 3
-
SUP-DO7013 Electrochemical dissolved oxygen sensor
SUP-DO7013 Electrochemical dissolved oxygen sensor is widely used in Aquaculture, water quality testing, informational data collection, IoT water quality testing etc. Features Range: 0-20mg/LResolution:0.01mg/LOutput signal: RS485Communication protocol: MODBUS-RTU
-
SUP-DO7011 Membrane dissolved oxygen sensor
SUP-DO7011 Membrane type dissolved oxygen sensor is the measure of oxygen dissolved in an aqueous solution. Polarographic measurement principle, the dissolution value depends on the temperature of the aqueous solution, pressure and salinity in solution. Features Range: DO：0-20 mg/L、0-20 ppm；Temperature：0-45℃Resolution:DO:±3% of the measured value；Temperature：±0.5℃Output signal: 4~20mATemperatureType:NTC 10k/PT1000
-
SUP-TDS7001 Conductivity sensor
SUP-TDS-7001 a variety of functions in one: conductivity EC / TDS measurement capabilities to achieve two in one, cost-effective integrated design to support the boiler water, RO water treatment, sewage treatment, pharmaceutical industry and other liquid measurement and monitoring. Features Range:0.01 electrode: 0.01~20us/cm
0.1 electrode: 0.1~200us/cmResolution:±1%FSThread:G3/4Pressure: 5 bar -
SUP-TDS7002 4 Electrodes conductivity sensor
SUP-TDS-7002 a variety of functions in one: conductivity EC / TDS measurement capabilities to achieve two in one, cost-effective integrated design to support the boiler water, RO water treatment, sewage treatment, pharmaceutical industry and other liquid measurement and monitoring. Features Range:10us/cm~500ms/cmResolution:±1%FSTemp compensation:NTC10K (PT1000, PT100, NTC2.252K optional)Temperature range: 0-50℃Temperature accuracy:±3℃
-
SUP-TDS6012 Conductivity sensor
SUP-TDS-6012 A variety of functions in one: conductivity EC / TDS measurement capabilities to achieve two in one, cost-effective integrated design to support the boiler water, RO water treatment, sewage treatment, pharmaceutical industry and other liquid measurement and monitoring. Features Range:0.01 electrode: 0.02～20.00us/cm
0.1 electrode: 0.2～200.0us/cm
1.0 electrode: 2～2000us/cm
10.0 electrode: 0.02～20ms/cm -
SUP-PH8001 Digital pH sensor
SUP-PH8001 pH electrode can be used for aquaculture, IoT water quality detection, with digital interface (RS485*1), can be used to measure the change of pH/ORP value in the aqueous solution system within the range, and it has standard RS485 Modbus RTU protocol interface function, Can communicate with the host computer remotely Features
- Zero potential point:7 ± 0.5 pH
- Output:RS485
- Installation size: 3/4NPT
- Communication:RS485
- Power supply:12VDC
-
SUP-PH5011 pH sensor
SUP-PH5011 pH sensor increasing the silver ion at the reference sensor part, to enhance the stability and accuracy, suitable for general industrial waste water and discharge solutions.
- Zero potential point: 7±0.25
- Conversion coefficient:≥95%
- Membrane resistance: ＜500Ω
- Practical response time:< 1 min
- Measurement range: 0–14 pH
- Temperature compensation: Pt100/Pt1000/NTC10K
- Temperature: 0~60℃
- Reference: Ag/AgCl
- Pressure resistance: 4 bar at 25 ℃
- Thread Connection: 3/4NPT
- Material: PPS/PC
-
SUP-PH5013A PTFE pH sensor for corrosive medium
SUP-pH-5013A pH sensor used in PH measurement is also called primary cell. The primary battery is a system whose function is to convert chemical energy into electrical energy. The voltage of this battery is called electromotive force (EMF). This electromotive force (EMF) consists of two half-cells. Features
- Zero potential point:7 ± 0.5 pH
- Conversion coefficient: > 95%
- Installation size: 3/4NPT
- Pressure: 1 ~ 4 Bar at 25 ℃
- Temperature: 0 ~ 60℃ for general cables
-
SUP-ORP6050 ORP sensor
SUP-ORP-6050 pH sensor used in ORP measurement is also called primary cell. The primary battery is a system whose function is to convert chemical energy into electrical energy. The voltage of this battery is called electromotive force (EMF). This electromotive force (EMF) consists of two half-cells. Features
- Range:-2000~+2000 mV
- Installation size: 3/4NPT
- Pressure:6 Bar at 25 ℃
- Temperature:0 ~ 60℃ for general cables
-
SUP-PH5011 pH sensor
SUP-PH5011 pH sensor used in PH measurement is also called primary cell. The primary battery is a system whose function is to convert chemical energy into electrical energy. The voltage of this battery is called electromotive force (EMF). This electromotive force (EMF) consists of two half-cells. Features
- Zero potential point:7 ± 0.5 pH
- Slope:> 95%
- Installation size: 3/4NPT
- Pressure:4 Bar at 25 ℃
- Temperature:0 ~ 60℃ for general cables
-
SUP-PH5022 Germany glass pH sensor
SUP-5022 tecLine electrodes are high-quality sensors for professional applications in process and industrial measurement technology. These electrodes are known for their use of top-quality materials and components. They are designed as combined electrodes (the glass or metal electrode and the reference electrode are combined in one shaft). A temperature probe can also be integrated as an option, depending on the type. Features
- Zero potential point:7 ± 0.5 pH
- Conversion coefficient: > 96%
- Installation size: Pg13.5
- Pressure: 1 ~ 6 Bar at 25 ℃
- Temperature: 0 ~ 130℃ for general cables
-
SUP-PTU8011 Turbidity Sensor
SUP-PTU-8011 turbidity meter based on the infrared absorption scattered light method and combined with the application of ISO7027 method, can guarantee the continuous and accurate detection of turbidity. Based on ISO7027, infrared double scattering light technology will not be affected by chroma for the measurement of turbidity value. According to the usage environment, self-cleaning function can be equipped with. It assures the stability of data and reliability of performance; with the built-in self-diagnosis function, it can make sure the accurate data be delivered; besides, the installation and calibration is quite simple. Features Range: 0.01-100NTU、0.01－4000NTUResolution:Less than ± 2% of the measured valuePressure range: ≤0.4MPaEnvironment temp: 0~45℃
-
SUP-PH5018 Glass pH sensor
SUP-PH5018 glass pH sensor is widely used in wastewater treatment and fields including mining and smelting, papermaking, paper pulp, textiles, petrochemical industry, process of semiconductor electronic industry and downstream engineering of biotechnology. Features
- Zero potential point:7 ± 0.5 pH
- Conversion coefficient: > 98%
- Installation size: Pg13.5
- Pressure: 0 ~ 4 Bar at 25 ℃
- Temperature: 0 ~ 100℃ for general cables
Tel.: +86 15867127446 (WhatApp)Email : info@Sinomeasure.com
-
SUP-PH5050 high temperature pH sensor
SUP-pH-5050 high temperature glass electrode used in PH measurement is also called primary cell. The primary battery is a system whose function is to convert chemical energy into electrical energy. The voltage of this battery is called electromotive force (EMF). This electromotive force (EMF) consists of two half-cells. Features
- Zero point: 7 ± 0.5 pH
- Installation thread: 3/4NPT
- Working pressure: 1 ~ 3 Bar at 25 ℃
- Temp: 0 to 60℃ for general cables
Tel.: +86 15867127446 (WhatApp)Email : info@Sinomeasure.com
-
SUP-PH5019 Plastic pH sensor
SUP-PH5019 plastic pH sensor is widely used in wastewater treatment and fields including mining and smelting, papermaking, paper pulp, textiles, petrochemical industry, process of semiconductor electronic industry and downstream engineering of biotechnology. Features
- Zero potential point:7 ± 0.5 pH
- Slope: > 98%
- Installation size: 3/4NPT
- Pressure: 1 ~ 3 Bar at 25 ℃
- Temperature: 0 ~ 60℃ for general cables
Tel.: +86 15867127446 (WhatApp)Email : info@Sinomeasure.com
-
SUP-DO700 Optical dissolved oxygen meter
SUP-DO700 dissolved Oxygen meter adopts fluorescence method to measure dissolved oxygen.The cap of the sensor is coated with a luminescent material. Blue light from an LED illuminates the luminescent chemical. The luminescent chemical instantly becomes excited and releases red light. The time and intensity of red light are inversely proportional to the concentration of oxygen molecules, So the concentration of oxygen molecules is calculated. Features Range: 0-20mg/L,0-200%,0-400hPaResolution:0.01mg/L,0.1%,1hPaOutput signal: 4~20mA; Relay; RS485Power supply: AC220V±10%; 50Hz/60Hz
-
SUP-DO7016 Optical dissolved oxygen sensor
SUP-DO7016 Optical Dissolved Oxygen Sensor is based on luminescent optical technology. The Optical Dissolved Oxygen sensor is approved by the ASTM International Method D888-05 Features Range: 0.00 to 20.00 mg/LResolution:0.01Response time: 90% of the value in less than 60 secondsSignal interface: Modbus RS-485 (standard) and SDI-12 (option)Power supply:5 ~ 12 volts
-
SUP-ORP6040 ORP sensor
SUP-ORP-6040 pH sensor used in ORP measurement is also called primary cell. The primary battery is a system whose function is to convert chemical energy into electrical energy. The voltage of this battery is called electromotive force (EMF). This electromotive force (EMF) consists of two half-cells. Features
- Range:-1000~+1000 mV
- Installation size: 3/4NPT
- Pressure:4 Bar at 25 ℃
- Temperature:0 ~ 60℃ for general cables
