-
Inline Ph Manufacturer – SUP-PTU300 Turbidity meter – Sinomeasure
Specification Range 0-20 NTU (31),0-1 NTU (30) Operating voltage DC 24V Measurement 90° scattering Working mode Continuous monitoring of drainage, intermittent automatic discharge Zero drift ≤±0.015 NTU Value error ≤±2% or ±0.015 NTU larger Discharge mode Automatic discharge Calibration Formalhydrazine standard liquid calibration (factory calibrated) Water pressure 0.1 Kg/cm3-8Kg/cm3, flow not exceeding 300 mL /min Digital output RS485Modbus protocol (baud rate 9600,8... -
Buy Cheap Flow Meter Suppliers – SUP-LZ Metal tube rotameter – Sinomeasure
Specification Porduct Metal Tube Rotameter Model SUP-LZ Range Water (20℃) (01~200000) L/h Air (20,0.1013MPa) (0.03~3000) m³/h Range ratio Standard 10:1 Optional 20:1 Accuracy Standard: 1.5% Optional:1% Gas: 1.5% Pressure standard：DN15~DN50≤4.0MPa DN80~DN200≤1.6MPa Optioanl: DN15~DN50≤32MPa DN80~DN200≤16MPa Connection Flange，Clamp，Thread， Sanity thread Medium temperature Standard：-20℃~120℃ PTFE 0℃~80℃ High temp：120℃~450℃ low temp： -80℃~-20℃ Environ... -
Buy Wastewater Flow Measurement Factories – SUP-PH6.0 pH ORP meter – Sinomeasure
Specification Product pH meter, pH controller Model SUP-PH6.0 Measure range pH: 0-14 pH, ±0.02pH ORP: -1000 ~1000mV, ±1mV Measuring medium Liquid Input Resistance ≥1012Ω Temp compensation Manual/ Auto temperature compensation Temperature Range -10~130℃， NTC10K or PT1000 Communication RS485, Modbus-RTU Signal output 4-20mA, maximum loop 750Ω, 0.2%FS Power supply 220V±10%,24V±20%,50Hz/60Hz Relay output 250V, 3A Introductio... -
Ph Sensor Supplier Factories – Standard pH calibration solutions – Sinomeasure
Frequent calibration is the best habit to maintain the measurement accuracy of the pH sensor/controller, because calibration can make your readings accurate and reliable. All sensors are based on slope and offset (Nernst equation). However, all sensors will change as the age. The pH calibration solution can also alert you if the sensor is damaged and needs to be replaced. The standard pH calibration solutions have an accuracy of +/- 0.01 pH at 25°C (77°F). Sinomeasure can provide the most pop... -
Buy Pressure Transmitter Accuracy Manufacturers – SUP-Y290 Pressure gauge battery power supply – Sinomeasure
Specification Product Pressure gauge Model SUP-Y290 Measure range -0.1~ 0 ~ 60MPa Indication resolution 0.5%FS Dimensions 81mm* 131mm* 47mm Ambient temperature -10 ~ 70 ℃ Tread type M20*1.5, M14*1.5, G1/2, G1/4 or customized Pressure type Gauge pressure; Absolute pressure Measure medium Liquid; Gas; Oil etc Pressure overload ＜40MPa，150%；≥40MPa，120% Power supply 3V Battery powered Introduction Description -
Buy 2 Wire Pressure Transmitter Suppliers – SUP-P3000 Pressure transmitter – Sinomeasure
Specification Product Pressure transmitter Model SUP-3000 Measure range 0～0.6kPa…60MPa(Gauge pressure); 0～2kPa…3MPa(Adiabatic pressure) Indication resolution ±0.075%FS；±0.1%FS Ambient temperature -20 ~ 65 ℃ Output signal 4-20mA analog output / with HART communication Diaphragm material 316L stainless steel Hastelloy C (custom) Process connection 316L stainless steel Fill oil Silicone oil Power supply 24VDC Introduction SUP-3000 Pressur... -
Buy Turbine Flow Meter Manufacturers Suppliers – SUP-LZ Metal tube rotameter – Sinomeasure
Specification Porduct Metal Tube Rotameter Model SUP-LZ Range Water (20℃) (01~200000) L/h Air (20,0.1013MPa) (0.03~3000) m³/h Range ratio Standard 10:1 Optional 20:1 Accuracy Standard: 1.5% Optional:1% Gas: 1.5% Pressure standard：DN15~DN50≤4.0MPa DN80~DN200≤1.6MPa Optioanl: DN15~DN50≤32MPa DN80~DN200≤16MPa Connection Flange，Clamp，Thread， Sanity thread Medium temperature Standard：-20℃~120℃ PTFE 0℃~80℃ High temp：120℃~450℃ low temp： -80℃~-20℃ Environ... -
Buy Hydrostatic Sensor Manufacturers – SUP-RD908 Radar level meter for river – Sinomeasure
Specification Product Radar level meter Model SUP-RD908 Measure range 0-30 meters Application Rivers, Lakes, Shoal Process Connection Thread G1½ A”/frame /flange Medium Temperature -20℃~100℃ Process Pressure Normal pressure Accuracy ±3mm Protection Grade IP67 Frequency Range 26GHz Signal Output 4-20mA RS485/Modbus Power supply DC(6~24V)/ Four-wire DC 24V / Two-wire Introduction SUP-RD908 Radar level meter is a safe solution even under ex... -
Buy Dissolved Oxygen Analyser Supplier – SUP-R4000D Paperless recorder – Sinomeasure
Specification Product Paperless recorder Model SUP-R4000D Display 5.6 inch TFT display screen Input Up to 16 channels of universal input Relay output 250VAC(50/60Hz)/3A Weight Approx 4.0Kg( without Optional Accessories) Communication RS485, Modbus-RTU Internal memory 6 MB Power supply 220VAC Outer dimensions 144(W)×144(H)×220(D) mm DIN panel cutout 137*137mm Introduction Description To ensure quality, starting from ... -
Buy Liquid Level Sensor Manufacturer – SUP-P260G High temp type submersible level meter – Sinomeasure
Advantages Compact shape, accurate measurement. According to fluid mechanics, the use of cylindrical arc shape, the effective media to the impact of the probe down to reduce the impact of probe shaking on the measurement stability Multiple waterproof and dustproof. The first protective layer: 316L sensor diaphragm, seamless connection, to ensure that the lead and the sensor probe waterproof; Second protective layer: pressure pipe design, to ensure that the protective layer and the lead pa... -
Buy 2088 Pressure Transmitter Suppliers – SUP-P350K Hygienic pressure transmitter – Sinomeasure
Specification Product Pressure transmitter Model SUP-P350K Measure range -0.1…0…3.5MPa Indication resolution 0.5% Ambient temperature -10 ~ 85 ℃ Output signal 4-20mA analog output Pressure type Gauge pressure; Absolute pressure Measure medium Liquid; Gas; Oil etc Pressure overload 150%FS Power 10-32V (4…20mA);12-32V (0…10V);8-32V (RS485) Introduction Description -
Ph Meter For Water Supplier – SUP-PH8001 Digital pH sensor – Sinomeasure
Specification Product Digital pH sensor Model SUP-PH8001 Measurement range 0.00-14.00pH; ±1000.0mV Resolution 0.01pH,0.1mV Heat resistance 0 ~ 60℃ Output RS485 (MODBUS-RTU) ID 9600，8，1，N (Standard) 1-255 Power supply 12VDC Power consumption 30mA @12VDC Introduction Communication Protocol Communication interface: RS485 Port setting: 9600,N,8,1 (default) Device address: 0×01 (default) Protocol specific...
