OEM Short Lead Time for Gas Flow Meter Price - SUP-LDG Sanitary electromagnetic flowmeter for food processing – Sinomeasure factory and manufacturers

Short Lead Time for Gas Flow Meter Price - SUP-LDG Sanitary electromagnetic flowmeter for food processing – Sinomeasure

short description:

Product Detail

Product Tags

Feedback (2)

We thinks what customers think, the urgency of urgency to act in the interests of a customer position of principle, allowing for better quality, lower processing costs, prices are more reasonable, won the new and old customers the support and affirmation for Digital Water Flow Meter Price, 4-20ma Signal Generator, Radar Water Level Sensor, We warmly welcome small business companions from all walks of lifestyle, hope to establish friendly and cooperative business make contact with with you and attain a win-win objective.

Short Lead Time for Gas Flow Meter Price - SUP-LDG Sanitary electromagnetic flowmeter for food processing – Sinomeasure Detail:

Specification

Product	Sanitary type electromagnetic flowmeter
Model	SUP-LDGS
Diameter nominal	DN15~DN1000
Nominal pressure	0.6~4.0MPa
Accuracy	±0.5%，±2mm/s(flowrate<1m/s)
Repetitiveness	0.2%
Liner material	PFA, F46, Neoprene, PTFE, FEP
Electrode material	Stainless steel SUS316, Hastelloy C, Titanium,
	Tantalum, Platinum-iridium
Medium temperature	Integral type: -10℃~80℃
	Split type: -25℃~180℃
Ambient temperature	-10℃~55℃
Power supply	100-240VAC，50/60Hz / 22VDC—26VDC
Electrical conductivity	Water 20μS/cm other medium 5μS/cm
Ingress protection	IP65, IP68(optional)
Product standard	JB/T 9248-2015

Measuring principle

The working principle of the electromagnetic flowmeter is based on Faraday’s law, which measures conductive media with a conductivity greater than 5μs/cm and a flow range of 0.2 to 15 m/s. An electromagnetic flow meter is a volume flow meter used to measure the flow rate of liquid through a pipeline.

The measurement principle of a magnetic flowmeter can be described as: when a liquid passes through a pipe with a diameter of D at a flow rate of v, the magnetic flux density generated by the excitation coil is B, and the following electromotive force E is proportional to the flow rate v:

Where:
E－Induced electromotive force
K－Meter constant
B－Magnetic induction density
V－Average flow speed in cross-section of measuring tube
D－Inner diameter of measuring tube

Introduction

SUP-LDGS sanitary electromagnetic flowmeter is applicable for all food grade conductive liquids measure, such as drinking water, food processing, pharmaceutical industry and many others. Typical applications are monitoring accurate measurements in liquid, metering and custody transfer.

Noted: the product strictly prohibited to be used in explosion-proof occasions.

Application

Electromagnetic flowmeters have been used throughout industries for more than 60 years. These meters are applicable for all conductive liquids, such as: Domestic water, industrial water, raw water, ground water, urban sewage, industrial wastewater, the processed neutral pulp, pulp slurry, etc

Automatic calibration line

Product detail pictures:

Related Product Guide:

Assume full responsibility to satisfy all needs of our clients; achieve continual advancements by endorsing the expansion of our purchasers; turn into the final permanent cooperative partner of clientele and maximize the interests of clients for Short Lead Time for Gas Flow Meter Price - SUP-LDG Sanitary electromagnetic flowmeter for food processing – Sinomeasure , The product will supply to all over the world, such as: United States, India, Tanzania, We also provide OEM service that caters to your specific needs and requirements. With a strong team of experienced engineers in hose design and development, we value every opportunity to provide best products for our customers.

Electromagnetic Flow Meter