Renewable Design for Portable Ultrasonic Flow Meter Price - SUP-LDG Carbon steel body electromagnetic flow meter – Sinomeasure
Renewable Design for Portable Ultrasonic Flow Meter Price - SUP-LDG Carbon steel body electromagnetic flow meter – Sinomeasure Detail:
-
Specification
Product: Electromagnetic flowmeter
Model: SUP-LDG
Diameter nominal: DN15~DN1000
Nominal pressure: DN6 – DN80, PN<4.0MPa; DN100 – DN150, PN<1.6MPa; DN200 – DN1000, PN<1.0MPa; DN1200 – DN2000, PN<0.6MPa
Accuracy: ±0.5%，±2mm/s(flowrate<1m/s)
Repetitiveness: 0.15%
Liner material: PFA, F46, Neoprene, PTFE, FEP
Electrode material: Stainless steel SUS316, Hastelloy C, Titanium, Tantalum, Platinum-iridium
Medium temperature: Integral type: -10℃~80℃; Split type: -25℃~180℃
Power supply: 100-240VAC，50/60Hz / 22-26VDC
Electrical conductivity: IP65, IP68(optional)
Product standard: JB/T 9248-2015
-
Measuring principle
Mag meter works based on Faraday’s law, when the liquid goes through the pipe at the flow rate of v with a diameter D, within which a magnetic flux density of B is created by an exciting coil, the following electromotive E is generated in proportion to flow speed v:
E=K×B×V×D
Where:
E－Induced electromotive force
K－Meter constant
B－Magnetic induction density
V－Average flow speed in cross-section of measuring tube
D－Inner diameter of measuring tube
-
Introduction
Noted: the product strictly prohibited to be used in explosion-proof occasions.
-
Description
Product detail pictures:
Related Product Guide:
With state-of-the-art technologies and facilities, strict good quality regulate, reasonable cost, exceptional assistance and close co-operation with prospects, we're devoted to supplying the top benefit for our customers for Renewable Design for Portable Ultrasonic Flow Meter Price - SUP-LDG Carbon steel body electromagnetic flow meter – Sinomeasure , The product will supply to all over the world, such as: Doha, Seychelles, Seattle, Our domestic website's generated over 50, 000 purchasing orders every year and quite successful for internet shopping in Japan. We would be happy to have an opportunity to do business with your company. Looking forward to receiving your message !
By ron gravatt from Turin - 2018.12.30 10:21
We have been appreciated the Chinese manufacturing, this time also did not let us disappoint,good job!
By olivier musset from Accra - 2017.09.30 16:36
