OEM Supply Vortex Shedding Flow Meter - SUP-LDG Carbon steel body electromagnetic flow meter – Sinomeasure
OEM Supply Vortex Shedding Flow Meter - SUP-LDG Carbon steel body electromagnetic flow meter – Sinomeasure Detail:
-
Specification
Product: Electromagnetic flowmeter
Model: SUP-LDG
Diameter nominal: DN15~DN1000
Nominal pressure: DN6 – DN80, PN<4.0MPa; DN100 – DN150, PN<1.6MPa; DN200 – DN1000, PN<1.0MPa; DN1200 – DN2000, PN<0.6MPa
Accuracy: ±0.5%，±2mm/s(flowrate<1m/s)
Repetitiveness: 0.15%
Liner material: PFA, F46, Neoprene, PTFE, FEP
Electrode material: Stainless steel SUS316, Hastelloy C, Titanium, Tantalum, Platinum-iridium
Medium temperature: Integral type: -10℃~80℃; Split type: -25℃~180℃
Power supply: 100-240VAC，50/60Hz / 22-26VDC
Electrical conductivity: IP65, IP68(optional)
Product standard: JB/T 9248-2015
-
Measuring principle
Mag meter works based on Faraday’s law, when the liquid goes through the pipe at the flow rate of v with a diameter D, within which a magnetic flux density of B is created by an exciting coil, the following electromotive E is generated in proportion to flow speed v:
E=K×B×V×D
Where:
E－Induced electromotive force
K－Meter constant
B－Magnetic induction density
V－Average flow speed in cross-section of measuring tube
D－Inner diameter of measuring tube
-
Introduction
Noted: the product strictly prohibited to be used in explosion-proof occasions.
-
Description
Product detail pictures:
Related Product Guide:
We purpose to understand high quality disfigurement with the output and supply the top service to domestic and overseas buyers wholeheartedly for OEM Supply Vortex Shedding Flow Meter - SUP-LDG Carbon steel body electromagnetic flow meter – Sinomeasure , The product will supply to all over the world, such as: Puerto Rico, Paraguay, Ethiopia, Our items have national accreditation requirements for qualified, high quality goods, affordable value, was welcomed by people today all over the world. Our products will continue to enhance within the order and look forward to cooperation with you, Should really any of these products and solutions be of curiosity to you, be sure to letus know. We are likely to be content to offer you a quotation up on receipt of your detailed needs.
By Alexia from Singapore - 2017.10.13 10:47
We are a small company that has just started, but we get the company leader's attention and gave us a lot of help. Hope we can make progress together!
By Hedy from Zambia - 2017.02.14 13:19
