OEM China 2 Inch Flow Meter - SUP-LDG-C Electromagnetic flow meter – Sinomeasure
OEM China 2 Inch Flow Meter - SUP-LDG-C Electromagnetic flow meter – Sinomeasure Detail:
-
Specification
Product: Electromagnetic flow meter
Model: SUP-LDG-C
Diameter nominal: DN15~DN1000
Nominal pressure: DN6 – DN80, PN<4.0MPa; DN100 – DN150, PN<1.6MPa; DN200 – DN1000, PN<1.0MPa; DN1200 – DN2000, PN<0.6MPa
Accuracy: ±0.3%，±2mm/s(flowrate<1m/s)
Repetitiveness: 0.15%
Liner material: PFA, F46, Neoprene, PTFE, FEP
Electrode material: Stainless steel SUS316, Hastelloy C, Titanium, Tantalum, Platinum-iridium
Medium temperature: Integral type: -10℃~80℃; Split type: -25℃~180℃
Power supply: 100-240VAC，50/60Hz / 22VDC—26VDC
Electrical conductivity: IP65, IP68(optional)
Product standard: JB/T 9248-2015
-
Measuring principle
Mag meter works based on Faraday’s law, when the liquid goes through the pipe at the flow rate of v with a diameter D, within which a magnetic flux density of B is created by an exciting coil, the following electromotive E is generated in proportion to flow speed v:
E=K×B×V×D
Where:
E－Induced electromotive force
K－Meter constant
B－Magnetic induction density
V－Average flow speed in cross-section of measuring tube
D－Inner diameter of measuring tube
-
Description
Noted: the product strictly prohibited to be used in explosion-proof occasions.
-
Automatic calibration line
Product detail pictures:
Related Product Guide:
Our target should be to consolidate and improve the high-quality and repair of current goods, in the meantime regularly produce new solutions to meet unique customers' needs for OEM China 2 Inch Flow Meter - SUP-LDG-C Electromagnetic flow meter – Sinomeasure , The product will supply to all over the world, such as: France, Bahrain, luzern, If any item be of interest to you, you should let us know. We will try our best to satisfy your requirements with high quality goods, the best prices and prompt delivery. You should feel free to contact us at any time. We will reply you when we receive your inquiries. Make sure you note that samples are available before we start our business.
By Gemma from Dubai - 2017.08.16 13:39
The factory technical staff gave us a lot of good advice in the cooperation process, this is very good, we are very grateful.
By Maxine from Nigeria - 2018.12.11 14:13
