Manufacturer for Non Contact Level Sensor - SUP-RD906 26GHz Tank radar level meter – Sinomeasure
Manufacturer for Non Contact Level Sensor - SUP-RD906 26GHz Tank radar level meter – Sinomeasure Detail:
-
Specification
| Products | Radar level meter sensor |
| Model no. | SUP-RD906 |
| Range | 0-20 meters |
| Application | Tank |
| Process Connection | Thread or Flange |
| Temperature | -40℃~150℃ |
| Process Pressure | Normal pressure |
| Accuracy | ±3mm |
| Protection Grade | IP67 |
| Frequency Range | 26GHz |
| Output | 4-20mA (Two-wire/Four-wire) |
| RS485 Modbus | |
| Power | DC(6~24V)/ Four-wire DC 24V / Two-wire |
-
Introduction

-
Product Size

-
Installation guide
![]() |
![]() |
![]() |
| Be installed in the diameter of the 1/4 or 1/6. Note: The minimum distance from the tank wall should be 200mm.Note: ① datum ②The container center or axis of symmetry | The top conical tank level, can be installed at the top of the tank is intermediate, can guarantee the measurement to the conical bottom | A feed antenna to the vertical alignment surface. If the surface is rough, stack angle must be used to adjust the angle of cardan flange of the antenna to the alignment surface. (Due to the solid surface tilt will cause the echo attenuation, even Loss of signal.) |
Product detail pictures:
Related Product Guide:
To be able to give you benefit and enlarge our business, we also have inspectors in QC Team and assure you our greatest service and products for Manufacturer for Non Contact Level Sensor - SUP-RD906 26GHz Tank radar level meter – Sinomeasure , The product will supply to all over the world, such as: Ghana, USA, Brasilia, We are proud to supply our products to every costumer all around the world with our flexible, fast efficient services and strictest quality control standard which has always approved and praised by customers.
The factory technical staff gave us a lot of good advice in the cooperation process, this is very good, we are very grateful.











