Manufacturer for Non Contact Level Sensor - SUP-RD903 Solid material radar level meter – Sinomeasure
Manufacturer for Non Contact Level Sensor - SUP-RD903 Solid material radar level meter – Sinomeasure Detail:
-
Specification
| Product | Radar level meter |
| Model | SUP-RD903 |
| Measure range | 0-70 meters |
| Application | Solid material, strong dust, easy to crystallize, condensation occasion |
| Process Connection | Thread, Flange |
| Medium Temperature | -40℃~250℃ |
| Process Pressure | -0.1 ~ 0.3 MPa (universal flange); -0.1～4.0 MPa (flat flange) |
| Accuracy | ±15mm |
| Protection Grade | IP67 |
| Frequency Range | 26GHz |
| Signal Output | 4-20mA (Two-wire/Four) |
| RS485/Modbus | |
| Power supply | 2-wire（DC24V）/ 4-wire（DC24V /AC220V） |
-
Introduction
-
Product Size
-
Installation guide
 |
 |
 |
| Be installed in the diameter of the 1/4 or 1/6.
Note: The minimum distance from the tank wall should be 200mm. Note: ① datum ②The container center or axis of symmetry |
The top conical tank level, can be installed at
the top of the tank is intermediate, can guarantee the measurement to the conical bottom |
A feed antenna to the vertical alignment surface.
If the surface is rough, stack angle must be used to adjust the angle of cardan flange of the antenna to the alignment surface. (Due to the solid surface tilt will cause the echo attenuation, even Loss of signal.) |
Product detail pictures:
Related Product Guide:
"Based on domestic market and expand overseas business" is our improvement strategy for Manufacturer for Non Contact Level Sensor - SUP-RD903 Solid material radar level meter – Sinomeasure , The product will supply to all over the world, such as: Iraq, Manchester, Estonia, So far our products have been exported to east Europe, the Middle East, Southeast, Africa and South America etc. We have 13years professional sales and purchase in Isuzu parts at home and abroad and the ownership of the modernized electronic Isuzu parts checking systems. We honor our core principal of Honesty in business, priority in service and will do our best to offer our customers with high quality products and excellent service.
By Tina from Kenya - 2017.12.02 14:11
It is really lucky to meet such a good supplier, this is our most satisfied cooperation, I think we will work again!
By Lulu from Bangladesh - 2017.08.21 14:13
