Manufacturer for Non Contact Level Sensor - SUP-RD701 Guided wave radar level meter – Sinomeasure
Manufacturer for Non Contact Level Sensor - SUP-RD701 Guided wave radar level meter – Sinomeasure Detail:
-
Specification
| Product | Guided wave radar level meter |
| Model | SUP-RD701 |
| Measure range | 0-30 meters |
| Application | Liquids and bulk solids |
| Process Connection | Thread/ Flange |
| Medium Temperature | -40℃~130℃(Standard)/-40～250℃(High temp) |
| Process Pressure | -0.1 ~ 4MPa |
| Accuracy | ±10mm |
| Protection Grade | IP67 |
| Frequency Range | 500MHz-1.8GHz |
| Signal Output | 4-20mA (Two-wire/Four) |
| RS485/Modbus | |
| Power supply | DC(6~24V)/ Four-wire DC 24V / Two-wire |
-
Introduction
-
Product Size
-
Installation guide
H—-Measuring range
L—-Empty tank height
B—-Blind area
E—-Minimum distance from probe to tank wall >50mm
Note:
The top Blind area refers to the minimum distance between the highest material surface of the material and the measurement reference point.
Blind area at the bottom refers to a distance that cannot be accurately measured near the bottom of the cable.
The effective measurement distance is between the top Blind area and the bottom Blind area.
Product detail pictures:
Related Product Guide:
We hold strengthening and perfecting our items and repair. At the same time, we get the job done actively to do research and progress for Manufacturer for Non Contact Level Sensor - SUP-RD701 Guided wave radar level meter – Sinomeasure , The product will supply to all over the world, such as: USA, Uruguay, Oslo, All these products are manufactured in our factory located in China. So we can guarantee our quality seriously and availably. Within these four years we sell not only our products but also our service to clients throughout the world.
By Tyler Larson from Sacramento - 2017.03.08 14:45
The after-sale warranty service is timely and thoughtful, encounter problems can be resolved very quickly, we feel reliable and secure.
By Christine from Tunisia - 2018.10.01 14:14
