Factory source Non Contact Flow Meter - SUP-LUGB Vortex flowmeter wafer installation – Sinomeasure
Factory source Non Contact Flow Meter - SUP-LUGB Vortex flowmeter wafer installation – Sinomeasure Detail:
-
Measuring principle
A fluid flowing with a certain velocity and passing a fixed obstruction generates vortices. The generation of vortices is known as Karman’s Vortices.The frequency of vortex shedding is a direct linear function of fluid velocity and frequency depends upon the shape and face width of bluff body. Since the width of obstruction and inner diameter of the pipe will be more or less constant, the frequency is given by the expression:
f=(St*V)/c*D -
Installation
Wafer connection: DN15-DN300(priority PN2.5MPa)
-
Accuracy
1.5%, 1.0%
-
Range Ratio
Gas density:1.2kg/m3, Range ratio: 8:1
-
Medium Temperature
-20°C ~ +150°C、-20°C ~ +260°C、-20°C ~ +300°C
-
Power Supply
24VDC±5%
Li battery(3.6VDC)
-
Output signal
4-20mA
Frequency
RS485 communication (Modbus RTU)
-
Ingress protection
IP65
-
Body Materials
Stainless stell
-
Display
128*64 dot matrix LCD
Noted: the product strictly prohibited to be used in explosion-proof occasions.
Product detail pictures:
Related Product Guide:
Which has a positive and progressive attitude to customer's desire, our corporation constantly improves our merchandise quality to satisfy the desires of consumers and further focuses on safety, reliability, environmental demands, and innovation of Factory source Non Contact Flow Meter - SUP-LUGB Vortex flowmeter wafer installation – Sinomeasure , The product will supply to all over the world, such as: belarus, Denmark, America, Customer satisfaction is our first goal. Our mission is to pursue the superlative quality, making continual progress. We sincerely welcome you to make progress hand in hand with us, and construct a prosperous future together.
By Henry from Jeddah - 2018.12.10 19:03
This manufacturers not only respected our choice and requirements, but also gave us a lot of good suggestions, ultimately， we successfully completed the procurement tasks.
By Stephen from Brunei - 2017.10.27 12:12
