OEM Factory Free sample Vortex Type Flow Meter - SUP-LDG Remote type electromagnetic flowmeter – Sinomeasure factory and manufacturers

Factory Free sample Vortex Type Flow Meter - SUP-LDG Remote type electromagnetic flowmeter – Sinomeasure

short description:

Product Detail

Product Tags

Feedback (2)

Excellent 1st,and Client Supreme is our guideline to deliver the ideal provider to our prospects.Nowadays, we have been seeking our best to become certainly one of the most effective exporters in our discipline to meet shoppers more require for Compressed Air Flow Meter, Ultrasonic Meter, 4-20ma Calibrator, With a wide range, good quality, reasonable prices and good service, we will be your best business partner. We welcome new and old customers from all walks of life to contact us for future business relationships and achieving mutual success!

Factory Free sample Vortex Type Flow Meter - SUP-LDG Remote type electromagnetic flowmeter – Sinomeasure Detail:

Specification

Product	Electromagnetic flowmeter
Model	SUP-LDG
Diameter nominal	DN15~DN1000
Nominal pressure	0.6~4.0MPa
Accuracy	±0.5%，±2mm/s(flowrate<1m/s)
Liner material	PFA,F46,Neoprene,PTFE,FEP
Electrode material	Stainless steel SUS316, Hastelloy C, Titanium,
	Tantalum Platinum-iridium
Medium temperature	Integral type: -10℃~80℃
	Split type: -25℃~180℃
Power supply	100-240VAC，50/60Hz, 22VDC—26VDC
Ambient Temperature	-10℃~60℃
Electrical conductivity	Water 20μS/cm other medium 5μS/cm
Structure type	Tegral type, split type
Ingress protection	IP68
Product standard	JB/T 9248-1999 Electormagnetic Flowmeter

Measuring principle

Mag meter works based on Faraday’s law, and measure conductive medium with conductivity more than 5 μs/cm and flow range from 0.2 to 15 m/s. An Electromagnetic Flowmeter is a volumetric Flowmeter that measures the flow velocity of a liquid through a pipe.

The measurement principle of magnetic flowmeters can be described as follows: when the liquid goes through the pipe at the flow rate of v with a diameter D, within which a magnetic flux density of B is created by an exciting coil, the following electromotive E is generated in proportion to flow speed v:

E=K×B×V×D

Where:
E－Induced electromotive force
K－Meter constant
B－Magnetic induction density
V－Average flow speed in cross-section of measuring tube
D－Inner diameter of measuring tube

Introduction

Noted: the product strictly prohibited to be used in explosion-proof occasions.

Application

Electromagnetic flowmeters have been used throughout industries for more than 60 years. These meters are applicable for all conductive liquids, such as:

Domestic water, industrial water, raw water, ground water, urban sewage, industrial wastewater, the processed neutral pulp, pulp slurry, etc

Description

Product detail pictures:

Related Product Guide:

As for aggressive rates, we believe that you will be searching far and wide for anything that can beat us. We can easily state with absolute certainty that for such good quality at such charges we are the lowest around for Factory Free sample Vortex Type Flow Meter - SUP-LDG Remote type electromagnetic flowmeter – Sinomeasure , The product will supply to all over the world, such as: Atlanta, moldova, Sao Paulo, Nowadays our merchandise sell all over the domestic and abroad thanks for the regular and new customers support. We supply high quality product and competitive price, welcome the regular and new customers cooperate with us!

1 Inch Flow Meter