Chinese wholesale Ultrasonic Level Transducer - SUP-RD901 Radar level meter for corrosive liquid – Sinomeasure
Chinese wholesale Ultrasonic Level Transducer - SUP-RD901 Radar level meter for corrosive liquid – Sinomeasure Detail:
-
Specification
| Product | Radar level meter |
| Model | SUP-RD901 |
| Measure range | 0-10 meters |
| Application | Corrosive liquid |
| Process Connection | Thread, Flange |
| Medium Temperature | -40℃~130℃ |
| Process Pressure | -0.1~0.3MPa |
| Accuracy | ±5mm（Less than 5 m） / ±10mm (5~10 m) |
| Protection Grade | IP67 |
| Frequency Range | 26GHz |
| Signal Output | 4-20mA |
| RS485/Modbus | |
| Power supply | DC(6~24V)/ Four-wire DC 24V / Two-wire |
-
Introduction
-
Product Size
-
Installation guide
Be installed in the diameter of the 1/4 or 1/6. The minimum distance from the tank wall should be 200mm.
Note: ① datum ②The container center or axis of symmetry
The top conical tank level, can be installed at the top of the tank is intermediate, can guarantee the measurement to the conical bottom
A feed antenna to the vertical alignment surface. If the surface is rough, stack angle must be used to adjust the angle of cardan flange of the antenna to the alignment surface.
Product detail pictures:
Related Product Guide:
Our growth depends on the superior equipment ,exceptional talents and continuously strengthened technology forces for Chinese wholesale Ultrasonic Level Transducer - SUP-RD901 Radar level meter for corrosive liquid – Sinomeasure , The product will supply to all over the world, such as: Bangalore, Qatar, Japan, Now we've been sincerely consider to grant brand agent in different areas and our agents' maximum margin of profit is the most important thing we care about. Welcome all of the friends and customers to join us. We have been ready to share win-win corporation.
By Andrew Forrest from Jeddah - 2017.08.18 18:38
This company conforms to the market requirement and joins in the market competition by its high quality product, this is an enterprise that have Chinese spirit.
By Jamie from Swiss - 2018.06.18 17:25
