Chinese wholesale Magnetic Type Flow Meter - SUP-LDG Carbon steel body electromagnetic flow meter – Sinomeasure
Chinese wholesale Magnetic Type Flow Meter - SUP-LDG Carbon steel body electromagnetic flow meter – Sinomeasure Detail:
-
Specification
Product: Electromagnetic flowmeter
Model: SUP-LDG
Diameter nominal: DN15~DN1000
Nominal pressure: DN6 – DN80, PN<4.0MPa; DN100 – DN150, PN<1.6MPa; DN200 – DN1000, PN<1.0MPa; DN1200 – DN2000, PN<0.6MPa
Accuracy: ±0.5%，±2mm/s(flowrate<1m/s)
Repetitiveness: 0.15%
Liner material: PFA, F46, Neoprene, PTFE, FEP
Electrode material: Stainless steel SUS316, Hastelloy C, Titanium, Tantalum, Platinum-iridium
Medium temperature: Integral type: -10℃~80℃; Split type: -25℃~180℃
Power supply: 100-240VAC，50/60Hz / 22-26VDC
Electrical conductivity: IP65, IP68(optional)
Product standard: JB/T 9248-2015
-
Measuring principle
Mag meter works based on Faraday’s law, when the liquid goes through the pipe at the flow rate of v with a diameter D, within which a magnetic flux density of B is created by an exciting coil, the following electromotive E is generated in proportion to flow speed v:
E=K×B×V×D
Where:
E－Induced electromotive force
K－Meter constant
B－Magnetic induction density
V－Average flow speed in cross-section of measuring tube
D－Inner diameter of measuring tube
-
Introduction
Noted: the product strictly prohibited to be used in explosion-proof occasions.
-
Description
Product detail pictures:
Related Product Guide:
No matter new customer or outdated client, We believe in extensive phrase and trusted relationship for Chinese wholesale Magnetic Type Flow Meter - SUP-LDG Carbon steel body electromagnetic flow meter – Sinomeasure , The product will supply to all over the world, such as: Cyprus, Sri Lanka, Islamabad, In the future, we promise to keep offer the high quality and more cost-effective products, the more efficient after sales service to our all customers all over the world for the common development and the higher benefit.
By Claire from Lisbon - 2018.06.26 19:27
As a veteran of this industry, we can say that the company can be a leader in the industry, select them is right.
By Rae from Durban - 2017.12.02 14:11
