Buy Ultrasonic Level Sensor Application Suppliers – SUP-RD905 Solid material radar level meter – Sinomeasure
Buy Ultrasonic Level Sensor Application Suppliers – SUP-RD905 Solid material radar level meter – Sinomeasure Detail:
-
Specification
| Product | Radar level meter |
| Model | SUP-RD905 |
| Measure range | 0-30 meters |
| Application | Solid particles, powder |
| Process Connection | Thread, Flange |
| Medium Temperature | -40℃~250℃ |
| Process Pressure | -0.1～4.0 MPa (flat flange); -0.1 ~ 0.3 MPa (universal flange) |
| Accuracy | ±10mm |
| Protection Grade | IP67 |
| Frequency Range | 26GHz |
| Signal Output | 4-20mA (Two-wire/Four) |
| RS485/Modbus | |
| Power supply | 2-wire（DC24V）/ 4-wire（DC24V /AC220V） |
-
Introduction
-
Product Size
-
Installation guide
 |
 |
 |
| Be installed in the diameter of the 1/4 or 1/6.
Note: The minimum distance from the tank wall should be 200mm. Note: ① datum ②The container center or axis of symmetry |
The top conical tank level, can be installed at
the top of the tank is intermediate, can guarantee the measurement to the conical bottom |
A feed antenna to the vertical alignment surface.
If the surface is rough, stack angle must be used to adjust the angle of cardan flange of the antenna to the alignment surface. (Due to the solid surface tilt will cause the echo attenuation, even Loss of signal.) |
Product detail pictures:
Related Product Guide:
Dedicated to strict quality management and thoughtful client services, our experienced staff customers are generally available to discuss your demands and guarantee full client pleasure for Buy Ultrasonic Level Sensor Application Suppliers – SUP-RD905 Solid material radar level meter – Sinomeasure , The product will supply to all over the world, such as: Finland, Cape Town, Japan, Our company regards "reasonable prices, efficient production time and good after-sales service" as our tenet. We hope to cooperate with more customers for mutual development and benefits. We welcome potential buyers to contact us.
By Natividad from Bolivia - 2017.12.19 11:10
We have been appreciated the Chinese manufacturing, this time also did not let us disappoint,good job!
By Jean Ascher from moldova - 2018.09.12 17:18
