Buy Ultrasonic Level Detector Factories – SUP-RD905 Solid material radar level meter – Sinomeasure
Buy Ultrasonic Level Detector Factories – SUP-RD905 Solid material radar level meter – Sinomeasure Detail:
-
Specification
| Product | Radar level meter |
| Model | SUP-RD905 |
| Measure range | 0-30 meters |
| Application | Solid particles, powder |
| Process Connection | Thread, Flange |
| Medium Temperature | -40℃~250℃ |
| Process Pressure | -0.1～4.0 MPa (flat flange); -0.1 ~ 0.3 MPa (universal flange) |
| Accuracy | ±10mm |
| Protection Grade | IP67 |
| Frequency Range | 26GHz |
| Signal Output | 4-20mA (Two-wire/Four) |
| RS485/Modbus | |
| Power supply | 2-wire（DC24V）/ 4-wire（DC24V /AC220V） |
-
Introduction
-
Product Size
-
Installation guide
 |
 |
 |
| Be installed in the diameter of the 1/4 or 1/6.
Note: The minimum distance from the tank wall should be 200mm. Note: ① datum ②The container center or axis of symmetry |
The top conical tank level, can be installed at
the top of the tank is intermediate, can guarantee the measurement to the conical bottom |
A feed antenna to the vertical alignment surface.
If the surface is rough, stack angle must be used to adjust the angle of cardan flange of the antenna to the alignment surface. (Due to the solid surface tilt will cause the echo attenuation, even Loss of signal.) |
Product detail pictures:
Related Product Guide:
We provide good power in high-quality and progress,merchandising,revenue and internet marketing and operation for Buy Ultrasonic Level Detector Factories – SUP-RD905 Solid material radar level meter – Sinomeasure , The product will supply to all over the world, such as: Indonesia, Bolivia, Pakistan, Our products are widely recognized and trusted by users and can meet continuously changing of economic and social needs. We welcome new and old customers from all walks of life to contact us for future business relationships and mutual success!
By Juliet from Ukraine - 2017.12.02 14:11
We have been appreciated the Chinese manufacturing, this time also did not let us disappoint,good job!
By Edith from Macedonia - 2018.06.05 13:10
