Buy Ultrasonic Level Detector Factories – SUP-RD901 Radar level meter for corrosive liquid – Sinomeasure
Buy Ultrasonic Level Detector Factories – SUP-RD901 Radar level meter for corrosive liquid – Sinomeasure Detail:
-
Specification
Product | Radar level meter |
Model | SUP-RD901 |
Measure range | 0-10 meters |
Application | Corrosive liquid |
Process Connection | Thread, Flange |
Medium Temperature | -40℃~130℃ |
Process Pressure | -0.1~0.3MPa |
Accuracy | ±5mm(Less than 5 m) / ±10mm (5~10 m) |
Protection Grade | IP67 |
Frequency Range | 26GHz |
Signal Output | 4-20mA |
RS485/Modbus | |
Power supply | DC(6~24V)/ Four-wire DC 24V / Two-wire |
-
Introduction
-
Product Size
-
Installation guide
Be installed in the diameter of the 1/4 or 1/6. The minimum distance from the tank wall should be 200mm.
Note: ① datum ②The container center or axis of symmetry
The top conical tank level, can be installed at the top of the tank is intermediate, can guarantee the measurement to the conical bottom
A feed antenna to the vertical alignment surface. If the surface is rough, stack angle must be used to adjust the angle of cardan flange of the antenna to the alignment surface.
Product detail pictures:




Related Product Guide:
Our company since its inception, always regards product quality as enterprise life, continuously improve production technology, improve product quality and continuously strengthen enterprise total quality management, in strict accordance with the national standard ISO 9001:2000 for Buy Ultrasonic Level Detector Factories – SUP-RD901 Radar level meter for corrosive liquid – Sinomeasure , The product will supply to all over the world, such as: Latvia, Swansea, Mauritius, We have more than 100 works in the plant, and we also have a 15 guys work team to service our customers for before and after sales. Good quality is the key factor for the company to stand out from other competitors. Seeing is Believing, want more information? Just trial on its products!

This company can be well to meet our needs on product quantity and delivery time, so we always choose them when we have procurement requirements.
