Buy Submersible Pressure Transducer Factory – SUP-RD901 Radar level meter for corrosive liquid – Sinomeasure
Buy Submersible Pressure Transducer Factory – SUP-RD901 Radar level meter for corrosive liquid – Sinomeasure Detail:
-
Specification
| Product | Radar level meter |
| Model | SUP-RD901 |
| Measure range | 0-10 meters |
| Application | Corrosive liquid |
| Process Connection | Thread, Flange |
| Medium Temperature | -40℃~130℃ |
| Process Pressure | -0.1~0.3MPa |
| Accuracy | ±5mm（Less than 5 m） / ±10mm (5~10 m) |
| Protection Grade | IP67 |
| Frequency Range | 26GHz |
| Signal Output | 4-20mA |
| RS485/Modbus | |
| Power supply | DC(6~24V)/ Four-wire DC 24V / Two-wire |
-
Introduction
-
Product Size
-
Installation guide
Be installed in the diameter of the 1/4 or 1/6. The minimum distance from the tank wall should be 200mm.
Note: ① datum ②The container center or axis of symmetry
The top conical tank level, can be installed at the top of the tank is intermediate, can guarantee the measurement to the conical bottom
A feed antenna to the vertical alignment surface. If the surface is rough, stack angle must be used to adjust the angle of cardan flange of the antenna to the alignment surface.
Product detail pictures:
Related Product Guide:
We know that we only thrive if we can easily guarantee our combined cost competiveness and high-quality advantageous at the same time for Buy Submersible Pressure Transducer Factory – SUP-RD901 Radar level meter for corrosive liquid – Sinomeasure , The product will supply to all over the world, such as: Lahore, Miami, Orlando, Our company considers that selling is not only to gain profit but also popularize the culture of our company to the world. So we are working hard to give you the wholehearted service and willing to give you the most competitive price in the market
By Moira from Swiss - 2017.11.29 11:09
The customer service staff's answer is very meticulous, the most important is that the product quality is very good, and packaged carefully, shipped quickly!
By Eden from Mozambique - 2018.11.02 11:11
