OEM Buy Steam Flow Meter Suppliers – SUP-LDG Stainless steel body electromagnetic flowmeter – Sinomeasure factory and manufacturers

Buy Steam Flow Meter Suppliers – SUP-LDG Stainless steel body electromagnetic flowmeter – Sinomeasure

short description:

Product Detail

Product Tags

Feedback (2)

"Based on domestic market and expand overseas business" is our improvement strategy for Analog Water Level Sensor, Flow Meter For Sewage Water, Water Level Sensor Working, We sincerely hope to establish some satisfactory relationships with you in the near future. We will keep you informed of our progress and look forward to building steady business relations with you.

Buy Steam Flow Meter Suppliers – SUP-LDG Stainless steel body electromagnetic flowmeter – Sinomeasure Detail:

Specification

Product	Electromagnetic flowmeter
Model	SUP-LDG
Diameter nominal	DN15~DN1000
Nominal pressure	0.6~4.0MPa
Accuracy	±0.5%，±2mm/s(flowrate<1m/s)
Liner material	PFA,F46,Neoprene,PTFE,FEP
Electrode material	Stainless steel SUS316, Hastelloy C, Titanium,
	Tantalum Platinum-iridium
Medium temperature	Integral type: -10℃~80℃
	Split type: -25℃~180℃
Ambient Temperature	-10℃~60℃
Electrical conductivity	Water 20μS/cm other medium 5μS/cm
Structure type	Tegral type, split type
Ingress protection	IP65
Product standard	JB/T 9248-1999 Electormagnetic Flowmeter

Measuring principle

Mag meter works based on Faraday’s law, and measure conductive medium with conductivity more than 5 μs/cm and flow range from 0.2 to 15 m/s. An Electromagnetic Flowmeter is a volumetric Flowmeter that measures the flow velocity of a liquid through a pipe.

The measurement principle of magnetic flowmeters can be described as follows: when the liquid goes through the pipe at the flow rate of v with a diameter D, within which a magnetic flux density of B is created by an exciting coil, the following electromotive E is generated in proportion to flow speed v:

E=K×B×V×D

Where:
E－Induced electromotive force
K－Meter constant
B－Magnetic induction density
V－Average flow speed in cross-section of measuring tube
D－Inner diameter of measuring tube

Introduction

SUP-LDG electromagnetic flowmeter is applicable for all conductive liquids. Typical applications are monitoring accurate measurements in liquid, metering and custody transfer. Can display both instantaneous and cumulative flow, and supports analog output, communication output and relay control functions.

Noted: the product strictly prohibited to be used in explosion-proof occasions.

Application

Electromagnetic flowmeters have been used throughout industries for more than 60 years. These meters are applicable for all conductive liquids, such as: Domestic water, industrial water, raw water, ground water, urban sewage, industrial wastewater, the processed neutral pulp, pulp slurry, etc

Description

Automatic calibration line

Product detail pictures:

Related Product Guide:

All we do is usually connected with our tenet " Consumer initial, Rely on 1st, devoting around the food stuff packaging and environmental safety for Buy Steam Flow Meter Suppliers – SUP-LDG Stainless steel body electromagnetic flowmeter – Sinomeasure , The product will supply to all over the world, such as: Swedish, Auckland, California, Now, with the development of internet, and the trend of internationalization, we have decided to extend business to overseas market. With the propose of bringing more profits to oversea customers by providing directly abroad. So we have changed our mind, from home to abroad, hope to give our customers more profit, and looking forward to more chance to make business.

4 Inch Flow Meter