Buy Sanitary Magnetic Flow Meter Suppliers – SUP-LDG Carbon steel body electromagnetic flow meter – Sinomeasure
Buy Sanitary Magnetic Flow Meter Suppliers – SUP-LDG Carbon steel body electromagnetic flow meter – Sinomeasure Detail:
-
Specification
Product: Electromagnetic flowmeter
Model: SUP-LDG
Diameter nominal: DN15~DN1000
Nominal pressure: DN6 – DN80, PN<4.0MPa; DN100 – DN150, PN<1.6MPa; DN200 – DN1000, PN<1.0MPa; DN1200 – DN2000, PN<0.6MPa
Accuracy: ±0.5%，±2mm/s(flowrate<1m/s)
Repetitiveness: 0.15%
Liner material: PFA, F46, Neoprene, PTFE, FEP
Electrode material: Stainless steel SUS316, Hastelloy C, Titanium, Tantalum, Platinum-iridium
Medium temperature: Integral type: -10℃~80℃; Split type: -25℃~180℃
Power supply: 100-240VAC，50/60Hz / 22-26VDC
Electrical conductivity: IP65, IP68(optional)
Product standard: JB/T 9248-2015
-
Measuring principle
Mag meter works based on Faraday’s law, when the liquid goes through the pipe at the flow rate of v with a diameter D, within which a magnetic flux density of B is created by an exciting coil, the following electromotive E is generated in proportion to flow speed v:
E=K×B×V×D
Where:
E－Induced electromotive force
K－Meter constant
B－Magnetic induction density
V－Average flow speed in cross-section of measuring tube
D－Inner diameter of measuring tube
-
Introduction
Noted: the product strictly prohibited to be used in explosion-proof occasions.
-
Description
Product detail pictures:
Related Product Guide:
Our concentrate on should be to consolidate and enhance the quality and service of present products, meanwhile consistently produce new products to meet unique customers' demands for Buy Sanitary Magnetic Flow Meter Suppliers – SUP-LDG Carbon steel body electromagnetic flow meter – Sinomeasure , The product will supply to all over the world, such as: Philippines, Wellington, Mozambique, At Present, our products have been exported to more than sixty countries and different regions, such as Southeast Asia, America, Africa, Eastern Europe, Russia, Canada etc. We sincerely hope to establish wide contact with all potential customers both in China and the rest part of the world.
By Hilary from Puerto Rico - 2017.01.11 17:15
It is really lucky to meet such a good supplier, this is our most satisfied cooperation, I think we will work again!
By Daphne from UK - 2017.02.18 15:54
