Buy Monitor Ph Factory – SUP-DO7013 Electrochemical dissolved oxygen sensor – Sinomeasure
Buy Monitor Ph Factory – SUP-DO7013 Electrochemical dissolved oxygen sensor – Sinomeasure Detail:
-
Specification
| Measurement | DO value in water |
| Measure range | 0~20.00mg/l |
| Resolution | 0.01mg/l |
| Temperature range | -20~60°C |
| Type of sensor | Galvanic Cell sensor |
| Measuring accuracy | <0.5mg/l |
| Output mode | RS485 port*1 |
| Communication protocol | Compatible with standard MODBUS-RTU protocol |
| Communication mode | RS485 9600,8,1,N (by default) |
| ID | 1~255 Default ID 01 (0×01) |
| Fixing method | RS485 remote setting calibration and parameters |
| Power supply mode | 12VDC |
| Power consumption | 30mA @12VDC |
-
Introduction
-
Intelligent module communication protocol Introduction
Communication port: RS485
Port setting: 9600,N,8,1 (by default)
Device address: 0×01 (by default)
Protocol specifications: Modbus RTU
Commands support: 0×03 read register
0X06 write register| 0×10 continuous write register
Information frame format
| 0×03 read data [HEX] | ||||
| 01 | 03 | ×× ×× | ×× ×× | ×× ×× |
| Address | Function code | Data head address | Data length | Check code |
| 0×06 write data [HEX] | ||||
| 01 | 06 | ×× ×× | ×× ×× | ×× ×× |
| Address | Function code | Data address | Write data | Check code |
Remarks: The check code is 16CRC with low byte ahead.
| 0×10 Continuous write data [HEX] | |||
| 01 | 10 | ×× ×× | ×××× |
| Address | Function code | Data
address |
Register
number |
| ×× | ×× ×× | ×× ×× | |
| Byte
number |
Write data | Check
code |
|
Format of register data
| Address | Data name | Switch coefficient | Status |
| 0 | Temperature | 0.1°C | R |
| 1 | DO | 0.01mg/L | R |
| 2 | Saturability | 0.1%DO | R |
| 3 | Sensor. null point | 0.1% | R |
| 4 | Sensor. slope | 0.1mV | R |
| 5 | Sensor. MV | 0.1%S | R |
| 6 | System status. 01 | Format 4*4bit 0xFFFF | R |
| 7 | System status.02
User command address |
Format: 4*4bit 0xFFFF | R/W |
Remarks:Data in each address is a 16-bit signed integer, the length is 2 bytes.
The real result=Register data * switch coefficient
Status:R=only read; R/W= read/write
Product detail pictures:
Related Product Guide:
We always think and practice corresponding to the change of circumstance, and grow up. We aim at the achievement of a richer mind and body and the living for Buy Monitor Ph Factory – SUP-DO7013 Electrochemical dissolved oxygen sensor – Sinomeasure , The product will supply to all over the world, such as: Iran, Russia, Madagascar, Our company considers that selling is not only to gain profit but also popularize the culture of our company to the world. So we are working hard to give you the wholehearted service and willing to give you the most competitive price in the market
By Marina from Lithuania - 2018.06.09 12:42
After the signing of the contract, we received satisfactory goods in a short term, this is a commendable manufacturer.
By Hannah from Stuttgart - 2018.06.18 19:26
