Buy Level Measurement Using Ultrasonic Sensor Factories – SUP-RD901 Radar level meter for corrosive liquid – Sinomeasure
Buy Level Measurement Using Ultrasonic Sensor Factories – SUP-RD901 Radar level meter for corrosive liquid – Sinomeasure Detail:
-
Specification
| Product | Radar level meter |
| Model | SUP-RD901 |
| Measure range | 0-10 meters |
| Application | Corrosive liquid |
| Process Connection | Thread, Flange |
| Medium Temperature | -40℃~130℃ |
| Process Pressure | -0.1~0.3MPa |
| Accuracy | ±5mm（Less than 5 m） / ±10mm (5~10 m) |
| Protection Grade | IP67 |
| Frequency Range | 26GHz |
| Signal Output | 4-20mA |
| RS485/Modbus | |
| Power supply | DC(6~24V)/ Four-wire DC 24V / Two-wire |
-
Introduction
-
Product Size
-
Installation guide
Be installed in the diameter of the 1/4 or 1/6. The minimum distance from the tank wall should be 200mm.
Note: ① datum ②The container center or axis of symmetry
The top conical tank level, can be installed at the top of the tank is intermediate, can guarantee the measurement to the conical bottom
A feed antenna to the vertical alignment surface. If the surface is rough, stack angle must be used to adjust the angle of cardan flange of the antenna to the alignment surface.
Product detail pictures:
Related Product Guide:
Adhering to your principle of "quality, assistance, performance and growth", we have now gained trusts and praises from domestic and international customer for Buy Level Measurement Using Ultrasonic Sensor Factories – SUP-RD901 Radar level meter for corrosive liquid – Sinomeasure , The product will supply to all over the world, such as: Argentina, Latvia, Burundi, We will not only continuously introduce technical guidance of experts from both home and abroad, but also develop the new and advanced products constantly to satisfactorily meet the needs of our clients all over the world.
By Linda from Mali - 2018.07.26 16:51
Reasonable price, good attitude of consultation, finally we achieve a win-win situation,a happy cooperation!
By Lynn from Swiss - 2018.06.21 17:11
