Buy Level Detector Sensor Supplier – SUP-RD905 Solid material radar level meter – Sinomeasure
Buy Level Detector Sensor Supplier – SUP-RD905 Solid material radar level meter – Sinomeasure Detail:
-
Specification
| Product | Radar level meter |
| Model | SUP-RD905 |
| Measure range | 0-30 meters |
| Application | Solid particles, powder |
| Process Connection | Thread, Flange |
| Medium Temperature | -40℃~250℃ |
| Process Pressure | -0.1～4.0 MPa (flat flange); -0.1 ~ 0.3 MPa (universal flange) |
| Accuracy | ±10mm |
| Protection Grade | IP67 |
| Frequency Range | 26GHz |
| Signal Output | 4-20mA (Two-wire/Four) |
| RS485/Modbus | |
| Power supply | 2-wire（DC24V）/ 4-wire（DC24V /AC220V） |
-
Introduction
-
Product Size
-
Installation guide
 |
 |
 |
| Be installed in the diameter of the 1/4 or 1/6.
Note: The minimum distance from the tank wall should be 200mm. Note: ① datum ②The container center or axis of symmetry |
The top conical tank level, can be installed at
the top of the tank is intermediate, can guarantee the measurement to the conical bottom |
A feed antenna to the vertical alignment surface.
If the surface is rough, stack angle must be used to adjust the angle of cardan flange of the antenna to the alignment surface. (Due to the solid surface tilt will cause the echo attenuation, even Loss of signal.) |
Product detail pictures:
Related Product Guide:
Sticking for the perception of "Creating goods of high quality and making good friends with people today from all around the world", we constantly set the interest of shoppers to begin with for Buy Level Detector Sensor Supplier – SUP-RD905 Solid material radar level meter – Sinomeasure , The product will supply to all over the world, such as: Mali, Nigeria, Lebanon, If any product meed your demand, please feel free to contact us. We're sure your any inquiry or requirement will get prompt attention, high-quality products, preferential prices and cheap freight. Sincerely welcome friends all over the world to call or come to visit, to discuss cooperation for a better future!
By Alexander from Sao Paulo - 2017.03.07 13:42
The factory technical staff gave us a lot of good advice in the cooperation process, this is very good, we are very grateful.
By Caroline from Uganda - 2017.03.28 12:22
