Buy Industrial Temperature Controller Factories – SUP-825-J Signal Calibrator 0.075% high accuracy – Sinomeasure
Buy Industrial Temperature Controller Factories – SUP-825-J Signal Calibrator 0.075% high accuracy – Sinomeasure Detail:
-
Specification
| General Specifications | Operating temperature | -10℃~55℃ |
| Storage temperature | -20℃~70℃ | |
| Relative Humidity (％RH operating without condensation) | 90%(10℃~30℃) | |
| 75%(30℃~40℃) | ||
| 45%(40℃~50℃) | ||
| 35%(50℃~55℃) | ||
| Uncontrolled<10℃ | ||
| EMC | EN55022, EN55024 | |
| Vibration | Random, 2g, 5 to 500Hz | |
| Concussion | 30g, 11ms, half sine bow wave | |
| Power requirement | 4 AA Ni-MH, Ni-Cd batteries | |
| Size | 215mm×109mm×44.5mm | |
| Weight | About 500g |
| DC Voltage | Range | Accuracy |
| Measurement | (0~100)mVDC(Upper display) | ±0.02% |
| (0~30)VDC(Upper display) | ±0.02% | |
| (0~100)mVDC(Lower display) | ±0.02% | |
| (0~20)VDC(Lower display) | ±0.02% | |
| Source | (0~100)mVDC | ±0.02% |
| (0~10)VDC | ±0.02% |
| Resistance | Range | Accuracy | |
| 4-wire | 2-, 3-wire | ||
| Accuracy | Accuracy | ||
| Measurement | (0~400)Ω | ±0.1Ω | ±0.15Ω |
| (0.4~1.5)kΩ | ±0.5Ω | ±1.0Ω | |
| (1.5~3.2)kΩ | ±1.0Ω | ±1.5Ω | |
| Excitation Current：0.5mA
Clear of resistance before measuring according to ‘10.4 Clear of Resistance and RTDs’. *3-wire: Assumes matched leads with a total resistance not exceeding 100Ω. Resolution (0~1000)Ω: 0.01Ω; (1.0~3.2)kΩ: 0.1Ω. |
|||
-
Advantages
· Two separate channels display.
the upper display shows measure parameters ;
the lower one shows measure or source parameters;
· Counting pulse function
· Calibration functions
· Auto ramping and auto stepping
· Manual and automatic cold junction compensating
· Clear function
· Temperature unit switching
· Auto flashing jacks
· Backlight LCD
· Battery gauge
Product detail pictures:
Related Product Guide:
Being supported by an advanced and specialist IT team, we could give technical support on pre-sales & after-sales services for Buy Industrial Temperature Controller Factories – SUP-825-J Signal Calibrator 0.075% high accuracy – Sinomeasure , The product will supply to all over the world, such as: Cairo, Iran, Belarus, We welcome you to visit our company & factory and our showroom displays various products that will meet your expectations. Meanwhile, it is convenient to visit our website. Our sales staff will try their best to provide you with the best services. If you need more information, please do not hesitate to contact us via E-mail, fax or telephone.
By Rebecca from Finland - 2017.01.11 17:15
The factory technical staff gave us a lot of good advice in the cooperation process, this is very good, we are very grateful.
By tobin from Somalia - 2018.10.31 10:02
