Buy Fluid Flow Meter Suppliers – SUP-LUGB Vortex flowmeter with temperature & pressure compensation – Sinomeasure
Buy Fluid Flow Meter Suppliers – SUP-LUGB Vortex flowmeter with temperature & pressure compensation – Sinomeasure Detail:
-
Measuring principle
Vortex flow meter work on the principle of generated vortex and relation between vortex and flow by theory of Karman and Strouhal, which specialize in measurement of steam, gas and liquid of lower viscosity. As shown in below illustration, medium flows through bluff body and then vortex is generated, vortices are alternately formed on both sides with opposite directions of rotation, Vortices frequency is directly proportional to medium velocity. Through numbers of vortices that is measured by sensor head, medium velocity is calculated, plus flow meter diameter, final volume flow come out.
-
Installation
Wafer connection: DN10-DN500(priority PN2.5MPa)
Flange connection: DN10-DN80(priority PN2.5MPa）DN100-DN200(priority PN1.6MPa）DN250-DN500(priority PN1.0MPa）
-
Accuracy
1.5%, 1.0%
-
Range Ratio
8:1
-
Medium Temperature
-20°C ~ +150°C、-20°C ~ +260°C、-20°C ~ +320°C、-20°C ~ +420°C
-
Power Supply
24VDC±5%
Li battery(3.6VDC)
-
Output signal
4-20mA
Frequency
RS485 communication (Modbus RTU)
-
Ingress protection
IP65
-
Body Materials
Stainless stell
-
Display
128*64 dot matrix LCD
Noted: the product strictly prohibited to be used in explosion-proof occasions.
Product detail pictures:
Related Product Guide:
Our corporation puts emphasis about the administration, the introduction of talented staff, plus the construction of team building, attempting hard to improve the quality and liability consciousness of team members. Our organization successfully attained IS9001 Certification and European CE Certification of Buy Fluid Flow Meter Suppliers – SUP-LUGB Vortex flowmeter with temperature & pressure compensation – Sinomeasure , The product will supply to all over the world, such as: Qatar, Haiti, United States, In order to meet more market demands and long-term development, a 150, 000-square-meter new factory is under construction, which will be put into use in 2014. Then, we shall own a large capacity of producing. Of course, we are going to continue improving the service system to meet the requirements of customers, bringing health, happiness and beauty to everyone.
By Gustave from Luxemburg - 2018.12.14 15:26
Goods just received, we are very satisfied, a very good supplier, hope to make persistent efforts to do better.
By Alma from Kenya - 2017.06.16 18:23
