2022 Latest Design Ultrasonic Flow Meter Manufacturer - SUP-LUGB Vortex flowmeter with temperature & pressure compensation – Sinomeasure
2022 Latest Design Ultrasonic Flow Meter Manufacturer - SUP-LUGB Vortex flowmeter with temperature & pressure compensation – Sinomeasure Detail:
-
Measuring principle
Vortex flow meter work on the principle of generated vortex and relation between vortex and flow by theory of Karman and Strouhal, which specialize in measurement of steam, gas and liquid of lower viscosity. As shown in below illustration, medium flows through bluff body and then vortex is generated, vortices are alternately formed on both sides with opposite directions of rotation, Vortices frequency is directly proportional to medium velocity. Through numbers of vortices that is measured by sensor head, medium velocity is calculated, plus flow meter diameter, final volume flow come out.
-
Installation
Wafer connection: DN10-DN500(priority PN2.5MPa)
Flange connection: DN10-DN80(priority PN2.5MPa）DN100-DN200(priority PN1.6MPa）DN250-DN500(priority PN1.0MPa）
-
Accuracy
1.5%, 1.0%
-
Range Ratio
8:1
-
Medium Temperature
-20°C ~ +150°C、-20°C ~ +260°C、-20°C ~ +320°C、-20°C ~ +420°C
-
Power Supply
24VDC±5%
Li battery(3.6VDC)
-
Output signal
4-20mA
Frequency
RS485 communication (Modbus RTU)
-
Ingress protection
IP65
-
Body Materials
Stainless stell
-
Display
128*64 dot matrix LCD
Noted: the product strictly prohibited to be used in explosion-proof occasions.
Product detail pictures:
Related Product Guide:
We stick to the principle of "quality first, service first, continuous improvement and innovation to meet the customers" for the management and "zero defect, zero complaints" as the quality objective. To perfect our service, we provide the products with the good quality at the reasonable price for 2022 Latest Design Ultrasonic Flow Meter Manufacturer - SUP-LUGB Vortex flowmeter with temperature & pressure compensation – Sinomeasure , The product will supply to all over the world, such as: Liverpool, Brazil, Tunisia, We insist on the principle of "Credit being primary, Customers being the king and Quality being the best", we are looking forward to the mutual cooperation with all friends at home and abroad and we will create a bright future of business.
By Ruth from Maldives - 2018.03.03 13:09
This manufacturers not only respected our choice and requirements, but also gave us a lot of good suggestions, ultimately， we successfully completed the procurement tasks.
By Sara from Spain - 2017.03.07 13:42
